MRI With Dental Implants: Safety, Images & Artifacts Explained
An MRI is generally safe with titanium or zirconia dental implants, though metal near the jaw can cause image artifacts. This guide explains MRI safety classes, implant materials, crowns, dentures and scan preparation.
An MRI scan is generally safe for people with dental implants. Titanium and zirconia implants are non-magnetic or only weakly magnetic, so they do not move, heat up dangerously, or interfere with the magnetic field in a way that would harm a patient during an MRI scan.
The main practical issue is not safety but image quality: metal near the jaw can create image artifacts on scans of the head and neck, while the rest of the body image usually stays clear and readable for the radiologist.
Overview of this article
- How Does an MRI Scan Work and Why Does Metal Matter?
- Why Modern Dental Implants Are Considered Safe for MRI
- What Are the Three MRI Safety Classifications?
- Titanium and Zirconia: Which Material Matters for MRI?
- What Causes Image Artifacts Around the Implant Site?
- Crowns, Bridges and Dentures
- Preparing for an MRI: Precautions and Documentation
- Older Implants and Unknown Devices
- Frequently Asked Questions
- Sources
How Does an MRI Scan Work and Why Does Metal Matter?
An MRI, or magnetic resonance imaging scan, uses a strong magnetic field and radio waves rather than radiation to create detailed images of soft tissue, bone, and organs. The scanner's magnets align hydrogen atoms in the body, then a radiofrequency pulse knocks them briefly out of alignment; as they realign, the machine reads the signal and a computer builds the image.
Metal matters in this process because certain metals are ferromagnetic, meaning they respond strongly to a magnetic field and can heat up, shift position, or distort the image. Non-ferromagnetic and non-magnetic metals, including the titanium used in modern dentistry, interact far less with the field. That is why dental implants and MRI scans are usually compatible, while old-style steel surgical clips or certain older orthopedic hardware can pose more of a concern for a doctor to evaluate first.
Why Modern Dental Implants Are Considered Safe for MRI
Modern dental implants are placed directly into the jawbone and almost always made from titanium or titanium alloys, occasionally zirconia. Both materials are non-ferromagnetic, which is the main reason dental implants are safe for MRI in the vast majority of cases.
If you had your implant placed through a documented process, such as the planning described on implant planning with imaging techniques and digital diagnostics, your provider can usually confirm the exact material used.
What Are the Three MRI Safety Classifications?
Medical devices, including dental implants, are labeled under one of three safety categories established for MRI environments:
- MRI Safe – no known hazard in any MRI setting, regardless of field strength.
- MRI Conditional – safe only under specific conditions, such as a defined magnetic field strength or scan duration.
- MRI Unsafe – known to pose a risk and not permitted in the scanner room.
Manufacturer documentation, when available, confirms the specific classification for a given implant system, which is one reason dentists recommend keeping an implant card after treatment.
Titanium and Zirconia: Which Material Matters for MRI?
Titanium and zirconia dominate modern dentistry for a reason beyond MRI safety: both integrate well with bone and resist corrosion.
| Material | Magnetic response | Typical MRI effect |
|---|---|---|
| Titanium dental implants | Non-ferromagnetic | Minor local image distortion possible, no movement risk |
| Zirconia implants | Non-magnetic ceramic | Minimal artifact |
People considering a metal-free option sometimes choose a ceramic implant partly for this reason, since zirconia produces less image distortion than some metal-based restorations. A titanium implant remains the more common choice overall.
What Causes Image Artifacts Around the Implant Site?
Image artifacts near an implant site happen because any metal, even non-magnetic metal, slightly disrupts the local magnetic field, creating a small zone of signal loss or distortion on the scan. Around dental implants this typically shows up as a dark or streaky area limited to the jaw and lower face on head or neck MRI scans.
This kind of image distortion is a known, well-documented part of radiology work and is not a sign of a problem with the implant itself. Radiologists and MRI technologists are trained to interpret images with this expected artifact and to distinguish it from genuine tissue findings.
Artifact reduction techniques, such as adjusting the scan sequence or the angle of the slice, can help when the implant site sits close to an area of particular clinical interest, like the sinuses or soft tissue of the mouth.
Crowns, Bridges and Dentures
Not all dental work is a surgically placed implant, and the material used changes how it behaves in a scanner. A dental implant crown attached to a titanium post follows the same safety profile as the implant itself, since the crown material, usually zirconia or porcelain, is also non-magnetic.
Fixed bridges and removable dentures are a different story. A traditional dental bridge can include metal framework. Removable devices such as a telescopic denture or a partial denture with metal clasps and attachments should generally be taken out before an MRI scan, the same way jewelry and other removable metal objects are removed, because loose metal is more likely to shift or heat than a fixed, bone-integrated implant.
Preparing for an MRI: Precautions and Documentation
Preparation for implant patients is straightforward but worth doing properly.
Practical steps before an MRI scan:
- Tell the scheduling staff about your dental implants, crowns, bridges or dentures when you book the appointment.
- Bring your implant card or any paperwork from your dentist naming the manufacturer and material, if available.
- Mention any other metal devices in your body, since the MRI technologist needs a full picture of what is present before the scan.
- Complete the standard screening questionnaire at the clinic; this is routine for every MRI, not specific to dental work.
- Remove any removable dentures, retainers, or partial dentures with metal attachments before entering the scan room.
- Ask your radiologist or technician afterward whether any artifact affected the specific area under investigation, if that is relevant to your diagnosis.
Older Implants and Unknown Devices
Older implants placed decades ago sometimes used materials or systems with less available documentation than current titanium and zirconia implants. If you do not know what your implant is made of, or the implant was placed before your current dental records existed, flag this clearly to the MRI team rather than assuming it is fine.
For dental implants this is rarely a practical obstacle, since the vast majority are made from well-characterized titanium or zirconia. Bone augmentation procedures, such as those described for dental bone augmentation, sometimes involve additional materials near the implant site worth mentioning for the same reason.
Frequently Asked Questions
Is It Safe to Get an MRI Scan With Dental Implants?
Yes, getting an MRI scan with dental implants is considered safe in routine clinical practice, since titanium and zirconia implants are non-magnetic or very weakly magnetic. The main precaution is informing your provider about your implants beforehand so documentation is on file.
Do Dental Implants Affect MRI Images?
Dental implants can cause a small, localized image artifact near the jaw, but this generally does not interfere with imaging of unrelated areas such as the brain or spine. Radiologists are familiar with this pattern and account for it when interpreting the scan.
Are Any Dental Implants Not MRI-Safe?
Implants made from older or less-documented metal alloys, rather than today's standard titanium or zirconia, could carry more uncertainty, mainly due to a lack of manufacturer testing data rather than a known hazard. When documentation is missing, radiology guidance recommends checking with the manufacturer before scanning rather than assuming compatibility.
Do You Need to Remove Dental Implants Before Getting an MRI Scan?
No, fixed dental implants are surgically integrated into the jawbone and are not removed before an MRI scan. Removable items such as dentures, retainers, or partial dentures with metal attachments should be taken out, similar to other removable metal objects.
Sources
Dental Implants: What You Should Know — U.S. Food and Drug Administration
Unwanted effects due to interactions between dental materials and magnetic resonance imaging: a review of the literature — Restorative Dentistry & Endodontics
Susceptibility artifacts induced by crowns of different materials with prepared teeth and titanium implants in magnetic resonance imaging — Scientific Reports
Testing and Labeling Medical Devices for Safety in the Magnetic Resonance (MR) Environment — U.S. Food and Drug Administration
MRI Safety — RadiologyInfo.org (RSNA / ACR)
MRI scan — NHS
Magnetic Resonance Imaging (MRI) — Cleveland Clinic







